• ARM Cortex-A7 microprocessor cores (quad-core) up to 1.1GHz 512KB L2 cache

Modem DSP

  • QDSP6 v5 core up to 691.2MHz 768KB L2 cache

Memory 8GB EMMC+8Gb LPDDR3
Operating System Android 6.0
Power Supply

  • Supply voltage: 3.5V~4.2V
  • Typical supply voltage: 3.8V

LTE Features

  • Support 3GPP R8 Cat.4 FDD and TDD
  • Support 1.4 to 20 MHz RF bandwidth

CDMA2000 Features
Support 3GPP2 CDMA2000 1X Advanced, CDMA2000 1x EV-DO Rev.A

  • EVDO: Max 3.1Mbps (DL)/Max 1.8Mbps (UL)
  • 1X Advanced: Max 307.2Kbps (DL)/Max 307.2Kbps (UL)

GSM Features

  • CSD: 9.6kbps, 14.4kbps


  • Support GPRS multi-slot class 33 (33 by default)
  • Coding scheme: CS-1, CS-2, CS-3 and CS-4

Max 85.6Kbps (UL)/Max 107Kbps (DL)
WLAN Features

  • Support 2.4GHz and 5GHz frequency bands
  • Support 802.11a/b/g/n, maximally up to 150Mbps
  • Support AP mode

Bluetooth Feature BT4.1 LE
Camera Interfaces

  • Use MIPI_CSI, up to 1.5Gbps per lane
  • 2-lane MIPI_CSI for rear camera, max pixel up to 8MP

Audio Interfaces
Audio input:

  • 2 groups of analog microphone input, integrating internal bias voltage

USB Interface

  • Compliant with USB 2.0 specification; the data transfer rate can reach up to 480Mbps
  • Debugging and firmware upgrade
  • Support USB OTG (Need additional 5V power supply chip) USB Driver: Support Windows XP, Windows Vista, Windows 7/8/8.1

UART Interfaces
2 UART interfaces: UART1 and UART2
SD Card Interface

  • Support SD 3.0, 4-bit SDIO
  • Support hot-plug

Real Time Clock Supported
Antenna Interfaces (4 Antennas)

  • Main antenna
  • DRX antenna
  • GNSS antenna
  • Wi-Fi/BT antenna

Operating temperature range: -35°C~+65°C 1)

F13M02A-201 Camera Module (MIPI & I2C intsrface)

  • 4-lane MIPI
  • Optical format 1/3.2” 13Mp (4:3)
  • Active pixels 4208H x 3120V
  • View Angle 74.48° +/-3°
  • Autofocus

Analog Device ADUX1020

  • Multifunction photometric sensor and signal
  • Fully integrated AFE, ADC, LED driver and timing core
  • Usable for multiple optical measurement applicationsה including gesture control and proximity sensing.
  • Ambient light rejection capability using both optical
    and analog filtering.
  • On-chip programmable flexible current sink for external LED.
  • High sensitivity and signal to noise ratio (SNR)
  • High resolution position measurement
  • Gesture recognition with 0.5cm to 15cm range
  • Proximity sensing to 20cm
  • 400KHz I2C interface
  • Gesture/proximity works under infrared (IR) transparent glass or other materials.

Analog Device ADXL343BCCZ

  • Multipurpose accelerometer with 10- to 13-bit resolution for use in a wide variety of applications
  • Digital output accessible via SPI (3- and 4-wire) and I2C
  • Built-in motion detection features make tap, double-tap, activity, inactivity, and free-fall detection trivial
  • User-adjustable thresholds
  • Interrupts independently mappable to two interrupt pins
  • 10,000 g shock survival