• ADuCM4050 from Analog Devices
  • Ultra-low power ARM® Cortex®-M4F MCU with integrated power management
  • SensorStrobe™ technology with 10x system-level power savings
  • Memory – 512 kB of embedded flash memory with ECC and 128 kB of configurable system SRAM with parity
  • Analog peripherals – 12-bit SAR ADC, 1.8 MSPS, 8 channels
  • Security – hardware cryptographic accelerator supporting AES-128, AES-256, and SHA-256


  • ADXL356 from Analog Devices
  • Low noise, low drift, low power, 3-axis MEMS accelerometer
  • ±10g, ±20g and ±40g ranges
  • 5.5kHz resonant frequency with adjustable analog output bandwidth
  • Excellent long-term stability from −40°C to +125°C
  • Integrated temperature sensor


  • BMM150 from Bosch
  • Low power and low noise 3-axis magnetic field sensor
  • Extended measurement range of ±1300 µt (x-, y- axis) and ±2500µT (z-axis) with 0.3µT resolution
  • Adjustable output bandwidth >300Hz


  • IM69D130 from Infineon
  • High performance microphone with dual backplane MEMS technology
  • 105dB dynamic range and 69 dB(A) SNR
  • Below 1% THD at 128 dBSPL
  • Flat frequency response with low frequency roll off at 28Hz


  • ADT7410 from Analog Devices
  • ±0.5°C accurate with 16-bit resolution
  • −55°C to +150°C temperature range
  • Programmable interrupts


  • LTC5800-IPM from Analog Devices
  • SmartMesh IP 2.4 GHz, 802.15.4e SoC as either a wireless mote, e-manager, or access point mote in a SmartMesh IP network
  • Complete radio transceiver, embedded processor, and networking software for forming a self-healing mesh network
  • Micrium μCOS-II real time OS based On-Chip SDK
  • >99.999% network reliability achieved in the most challenging RF environments


  • Ultra-low power, low-g ADXL362 from Analog Devices for unlocking additional system-level power savings
  • Optional micro-SD card for data logging
  • USB to serial UART interface, USB 2.0 full speed compatible
  • Two LED status indicator lights
  • Up to 2x coin battery CR2477 for extended battery life
  • Operating temperature from -40 °C to 85 °C
  • Fundamental time-domain and FFT analysis in the MCU per default
  • Advanced SW and analytics for early fault detection on demand
  • User-programmable sensor interrupts for triggering events
  • Cloud connectivity via an optional SmartMesh™ IP gateway or USB network manager
  • Optional cloud apps and advanced analytics
  • Easy-to-use interface